To prevent an error when disabling features of a rbd image with already
disabled flags. This aborted the CT/VM cloning halfway through with
a leftover rbd image, but no vmid.conf to it.
Signed-off-by: Alwin Antreich <a.antreich@proxmox.com>
Takes an operation, an optional requested bandwidth
limit override, and a list of storages involved in the
operation and lowers the requested bandwidth against global
and storage-specific limits unless the user has permissions
to change those.
This means:
* Global limits apply to all users without Sys.Modify on /
(as they can change datacenter.cfg options via the API).
* Storage specific limits apply to users without
Datastore.Allocate access on /storage/X for any involved
storage X.
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
this will be used in the gui, for determining if we need to select
something from the storage when using for an image
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
We otherwise use the long options everywhere in the plugin.
This will build the following command:
iscsiadm --mode session --sid 1 --rescan
Rescanning session [sid: 1, target: xxx, portal: yyy]
preserve the old behaviour of selecting auth_supported based on the
existence of the keyring, but limit it to external clusters.
this allows switching 'auth XXX required' in the pveceph-managed
ceph.conf while still automatically copying the keyring when adding a
storage.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
add /etc/pve/ceph.conf to commands / option strings instead
of the monitor list provided via the 'monhost' option.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
to allow differentiating between user-created external RBD storage
entries (WITH monhost), and those created and managed by pveceph
(without).
making monhost non-fixed allows easily opting into the managed behaviour via
'pvesm set STORAGE -delete monhost', but is also helpful for external clusters
(i.e., after adding or removing a monitor you need to update the monhost
parameter..)
adapt description accordingly.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
This turns is_mountpoint more into export(5)'s `mountpoint`
property.
Given the directory storage with the properties:
path /a/b/c
is_mountpoint $value
$value = yes
Same as before, /a/b/c must be mounted.
$value = no (or not set)
Same as before, no effect.
$value = /a/b
New: /a/b must be mounted (as opposed to /a/b/c)
Ceph change ceph version output.
full output of 'ceph --version'
Luminous 'ceph version 12.1.0 (262617c9f16c55e863693258061c5b25dea5b086) luminous (dev)'
Jewel 'ceph version 10.2.7 (50e863e0f4bc8f4b9e31156de690d765af245185)'
Wrap the -d test with run_or_get_killed sub this test
can make pvestatd hang on I/O wait when a nfsd process is stopped
This might help with other file based storages, for instance
directory storages on unplugged USB devices.
All of them have a `+size` prefix to show that they're not
"pure raw" or "pure tar" streams, because some storage may
need to know in advance how much storage to allocate.
The formats are explained in comments.
PVE::Storage::Plugin now has default implementations for
these for non-incremental streams exporting the current
(rather than a snapshot state).
To use qcow2 or vmdk formats $with_snapshots must be true,
otherwise raw/tar will be used where $with_snapshots must
be false.
this caused the webinterface to sort alphabetically instead of numerical
when sorting by image size
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
since we allow vm-ID-whatever when allocating images, we
should also include those when listing them.
note: '@' is reserved for snapshots in ceph, so it is safe to
skip lines including an '@' in the image name.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
with more than a few images, 'rbd ls -l' gets rather slow
compared to a simple 'rbd ls'. since we only need to check
existing image names for finding a free one, the latter is
sufficient.
example with ~400 rbd images:
$ time rbd ls -p ceph-vm > /dev/null
real 0m0.027s
user 0m0.012s
sys 0m0.008s
$ time rbd ls -l -p ceph-vm > /dev/null
real 0m5.250s
user 0m1.632s
sys 0m0.584s
a linked clone of two disks on the same setup accordingly
also shows a massive speedup:
$ time qm clone 1000 10000 -snap test
create linked clone of drive scsi0 (ceph-vm:vm-1000-disk-2)
clone vm-1000-disk-2: vm-1000-disk-2 snapname test to
vm-10000-disk-1
create linked clone of drive scsi1 (ceph-vm:vm-1000-disk-1)
clone vm-1000-disk-1: vm-1000-disk-1 snapname test to
vm-10000-disk-2
real 0m11.157s
user 0m3.752s
sys 0m1.308s
$ time qm clone 1000 10000 -snap test
create linked clone of drive scsi1 (ceph-vm:vm-1000-disk-1)
clone vm-1000-disk-1: vm-1000-disk-1 snapname test to
vm-10000-disk-1
create linked clone of drive scsi0 (ceph-vm:vm-1000-disk-2)
clone vm-1000-disk-2: vm-1000-disk-2 snapname test to
vm-10000-disk-2
real 0m0.872s
user 0m0.652s
sys 0m0.096s
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
With krbd we resize volume and tell QemuSever to notify running QEMU
with zero $size by returning undef.
Signed-off-by: Dmitry Petuhov <mityapetuhov@gmail.com>
this works around a bug, where qemu does not align the qcow2 file
when using the filesystem directly, and the gluster blockdriver
refuses to read from it
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
the old code was way too broad here, this fixes at least the
following issues:
- importing of other/unconfigured zpools by "import -a"
- possible false positives if a pool name is a substring of
another pool name because of "list" without pool name,
potentially skipping activation for such pools
- not noticing failure to activate in activate_storage
because the success of "zpool import -a" does not tell us
anything about the pool we actually wanted to import
checking specifically for the pool to be activated when
calling "zpool list" gets rid of the second issue, and
trying to import only that pool fixes the other two.
