commit 54e0b0034b introduced the
"_netdev" option, for PVE 5.3. The systemd generator then correctly
resolved that in the following resulting order-dependencies:
> Wants=network-online.target
> Before=umount.target remote-fs.target
> After=remote-fs-pre.target system.slice network.target network-online.target -.mount
This worked well and all were happy. With the current systemd in 6.0
we sometimes get the local-fs ones there generated too. This is a
fallout from a try to better handling nested mount hierachies, where
a .mount unit needs to be mounter or unmounted, before or after,
respectively, the parent mount was processed. It seems that sometime
that glitches and thus a "RequireMountFor=/mnt/pve" gets thrown in
and result sometimes in the local-fs order constraints being added.
The issue now is, that one must not have ordering depends to all,
local-fs, local-fs-pre, remote-fs, remote-fs-pre, as that gets you a
ordering cycle. Systemd tries to solve that cycle by randomly
dropping one constraint and retrying. By luck this is a not so
important unit, and all goes on well. Most of the time one isn't that
lucky and something important gets dropped, for example:
> Jan 24 18:43:05 prod1 systemd[1]: sysinit.target: Found ordering cycle on systemd-timesyncd.service/stop
> Jan 24 18:43:05 prod1 systemd[1]: sysinit.target: Found dependency on systemd-tmpfiles-setup.service/stop
> Jan 24 18:43:05 prod1 systemd[1]: sysinit.target: Found dependency on local-fs.target/stop
> Jan 24 18:43:05 prod1 systemd[1]: sysinit.target: Found dependency on mnt-pve-cephfs.mount/stop
> Jan 24 18:43:05 prod1 systemd[1]: sysinit.target: Found dependency on remote-fs-pre.target/stop
> Jan 24 18:43:05 prod1 systemd[1]: sysinit.target: Found dependency on rbdmap.service/stop
> Jan 24 18:43:05 prod1 systemd[1]: sysinit.target: Found dependency on sysinit.target/stop
> Jan 24 18:43:05 prod1 systemd[1]: sysinit.target: Job remote-fs-pre.target/stop deleted to break ordering cycle starting with sysinit.target/stop
Then, most of the time the host reboot hangs for ~10 minutes, often
showing scapegoat units like the pve-ha-lrm being the cause of the
hang (even if no HA is configure >.<).
This behavior is fixed with newer systemd versions, e.g., the v244
from buster-backports, but that is not a real option for us for now.
So until 7.0 we generate the unit with the correct dependencies
directly in the ephemeral /run/ tmpfs backed systemd/system path and
start it.
While FUSE gets only the local-fs ordering constraint, it seems to cope
very well regarding such symptoms. But it _is_ racy and probably only
works due to systemd stopping it early as it has not much ordering
constraints at all.. It should be moved in the future nonetheless, as
there's a mount.fuse.ceph helper that should be not an issue.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
This is but a hack, but we have no general helper/tools module here
and I do not want to do versioned dependencies for this fast-tracked
bugfix to pve-common, so I'll have to live with the shame for now.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
when listing volumes, otherwise an empty hash can be persisted into the
current worker's $vmlist, which could cause issues at various other API
endpoints.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
We can use 'list_images' to get the desired volume IDs in
'find_free_diskname' for most plugins. For the two LVM plugins, 'list_images'
potentially skips untagged volumes, so we keep the custom version. For the
RBD plugin, 'list_images' is much more costly than the custom version, so we
keep the custom version.
Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
we need to unprotect more snapshots than just the base one, since we
allow linked clones of regular VM snapshots. unprotection will only work
if no linked clones exist anymore.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
The size is required to be a multiple of volblocksize. Make sure
that the requirement is always met, so ZFS won't complain when we do
things like 'qm resize 102 scsi1 +0.01G'.
Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
Letting LVM set the meta-data size internally was not a good idea, as
it produces really small metadata LVs. Adapts the same logic as the
installer.
Signed-off-by: Tim Marx <t.marx@proxmox.com>
Reviewed-By: Dominik Csapak <d.csapak@proxmox.com>
Tested-By: Dominik Csapak <d.csapak@proxmox.com>
Those come normally from virtual devices, like a IPMI disk, if no
media is attached. They spam the log really often on operations like
migrate, and are quite scare-mongering. So filter them out.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
it does not work:
disable RBD image features this kernel RBD drivers is not compatible with: fast-diff,object-map,deep-flatten
clone failed: could not disable krbd-incompatible image features 'fast-diff,object-map,deep-flatten' for rbd image: vm-123123123-disk-0@test: rbd: snapshot name specified for a command that doesn't use it
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
since 'pvesm export' and 'pvesm import' are connected via a pipe and
SSH, a fatal error in the former can lead to no valid header being
written to the pipe. handle this more gracefully by printing an easier
to understand error message, instead of uninitialized warnings with no
context.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Modern kernel, like 5.3, support all those features ('fast-diff',
'object-map', 'deep-flatten'), so we do not want to disable them
there. 5.0 already supports exclusive-locks, so no need to disable
exclusive locking there.
Further, we also want to profit from new features available, so let's
enable those which can be enabled "live" (i.e., after image creation)
if their available.
While we could also parse the kernel information directly from:
/sys/module/libceph/parameters/supported_features
there's not much advantage to that, features cannot be disabled with
KConfig, their also very dependent of the kernel version booted.
So for us it's enough to check that one.
This only affects container and VMs backed by a storage with KRBD
explicitly enabled. But as the enabling and disabling happens
transparently, it has no effect on the running guest.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
The bugfix for #2317 introduced a kind of odd API behavior, where
each volume was returned twice from our API if a storage has both
'rootdir' & 'images' content types enabled. To give the content type
of the volume an actual meaning, it is now inferred from the
associated guest, if there's no guest or we don't have an owner for
that volume we default to 'images'.
At the volume level, there is no option to list volumes based on
content types, since the volumes do not know what type they are
actually used for.
Signed-off-by: Tim Marx <t.marx@proxmox.com>
When adding a zfspool storage with 'pvesm add' the mount point is now
added automatically to the storage configuration if it can be
determined. path() does not assume the default mountpoint anymore,
fixing 2085.
Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
When working with several ZFS over iSCSI / LIO storages, we might lookup
between them with less than 15 sec interval.
Previously, the cache of the previous storage was used, which was breaking
disk move for example
Signed-off-by: Daniel Berteaud <daniel@firewall-services.com>
